Deepwell Submersible Motors
L-Series Oil Filled Rewindable

L-SERIES-Oil-Filled-Rewindable-Motors

C.R.I.'s L – Series motors are developed with diligence complying with all safety standards and giving importance to the customers need. All the components that are in contact with water is made of AISI 304 Stainless Steel. The motor is prefilled with edible grade oil which acts as coolant as well as lubricant and heat dissipation media. Dynamically balanced rotor of these 'L' series motors are equipped with quality ball bearing maintain uniform clearance thereby giving better efficiency and increase the life cycle. The shaft extension is made of 300 series Stainless Steel to avoid splines worn out. High quality carbon / ceramic mechanic seal and oil seal made of Nitrile rubber and used to ensure better sealing system. For easy maintenance and safe handling plug in type removable cable leads are provided. Mounting dimension of Motors are accordance with NEMA standard.

Nominal Diameter 4" 6"
Power Range (Kw) 0.37 kW - 2.2 kW - Single Phase,
0.37 kW - 7.5 kW - Three Phase
5.5 kW - 45 kW - Three Phase,
Speed 2900 rpm 2900 rpm
Versions A.C. Single Phase : 230 V - 50 Hz :
Permenent Split Capacitor (PSC)
A.C. Three Phase: 415 V - 50 Hz 0.37 kW - 7.5 kW :
Direct online (D.O.L)
A.C. Three Phase: 380 V - 415 V
50 Hz
Maximum Down Thrust Load 0.37 kW - 0.75 kW : 1500 N,
1.1 kW - 4 kW : 2500 N,
5.5 kW - 7.5 kW : 4500 N
5.5 kW - 15 kW : 15,500 N,
18.5 kW - 45 kW : 30,000 N
Type of Duty S1 (continuous) S1 (continuous)
Degree of Protection IP 68 IP 68
Class of Insulation F F
Maximum Immersion depth 150 m 70 m
Maximum Liquid Temperature 33°C 33°C
Minimum Cooling Flow 0.15 m/s 0.15 m/s
Starts per Hour 20 times 20 times
Shaft Splined as per NEMA Standard Splined as per NEMA Standard
Mounting dimensions are in accordance with NEMA STANDARDS
  • High operating efficiency and lesser power consumption
  • Extremely hared wearing ball & angular contact bearings
  • Filled with non-toxic oil
  • Can be easily dismantled repaired
Part Name Type-A / N
Housing Shell SS 304
Stator Shell SS 304
Bearings Upper : Ball Bearing Lower: Angular Contact ball bearing (Upto 3kW – 1No. & from 3.7 kW – 2 Nos.)
Shaft extension 17 – 4PH
Lip seal / Oil seal Nitirle Rubber (NBR)
Mechanical Seal Carbon / Ceramic
Diaphragm Nitirle Rubber (NBR)
Used as prime mover to couple with deepwell submersible pumps for the applications of
  • home Residential
  • irrigation Irrigation
  • fountains Fountains
  • industrial-water-supply Industrial water supply
  • pressure-boosting-units Pressure Boosting Units
  • Gardens Gardens
  • >Sprinkler Systems Sprinkler Systems
  • Mining Mining
  • CBM (Coal bed methane) CBM (Coal bed methane)